Looking for commercial fire doors that are easy to specify, compliant, and fully traceable?
Premier Fire Doors supplies FD30 and FD60 fire-resisting door assemblies, frames, and ironmongery for commercial, residential, and mixed‑use projects across the UK. Our focus is on correct specification from day one, so your doors perform as tested when installed correctly.
Explore standard sizes or bespoke options, then contact our team on 0330 122 9550 or sales@premierfiredoors.com for project support and quotations.
- FD30 and FD60-rated assemblies for internal and external use
- Complete system approach: leaf, frame, seals, glazing, and ironmongery
- Third‑party certification references (e.g. BM TRADA Q‑Mark, BWF Certifire) where
- applicable
- Compliance pack issued with every order to support Building Control sign‑off
- Bespoke sizing, finishes, and glazing options available
Commercial fire doors as complete systems
In commercial buildings, fire doors are rarely just single door blank; they are certified systems.
Premier Fire Doors supplies complete fire doors and frames with compatible ironmongery and seals so that, when installed correctly, the assembly can perform as rated.
Our ranges cover:
- FD30 (30‑minute) assemblies for common corridor and room doors
- FD60 (60‑minute) assemblies for higher‑risk areas and protected routes
Internal commercial doorsets with or without glazing
External commercial fire doors for escape routes and entrancesEvery order is supplied with a compliance pack (passport) and supporting documentation so dutyholders can evidence specification, certification references, and component compatibility.
Fire door specifications for commercial projects
Getting fire door specifications right at the start of a project significantly reduces risk, cost, and delay.
Premier Fire Doors supports specifiers, contractors, and facilities managers with:
- Clear FD30 and FD60 rating information
- Guidance on matching leaves, frames/linings, and hardware
- Advice on smoke control requirements and intumescent seals
- Support materials on fire door regulations
Typical specification points include:
Rating and application – FD30 or FD60; internal or external location; escape route or compartment line
Core construction – many solutions use a solid timber core for stability and predictable performance
Frames and linings – FD30 frames in softwood or hardwood; FD60 linings in hardwood where certification requires
Seals – combined heat and cold smoke seals sized and positioned in line with the tested configuration
Glazing – fire‑rated clear glass first, with Georgian Wired (GWPP) offered where available
Ironmongery – tested hinges, closers, locks, latches, and signage to match the certificate
Our advisory team can help you coordinate these elements into a single, traceable specification.
Solid core fire door options
For many commercial applications a solid core fire door is preferred for robustness and reliable performance under test conditions.
Premier Fire Doors supplies:
FD30 leaves suitable for commercial internal use at 44mm thickness
FD60 leaves typically manufactured at around 54mm thickness, with solid timber core options available
Matching frames and linings, including hardwood FD60 linings where required for certification and softwood for FD30.When paired with compatible fire door components and installed in line with the relevant test evidence, these solid‑core solutions help maintain integrity and compartmentation for the stated period.
Fire doors types and applications
Different commercial settings demand different fire doors types. Premier Fire Doors offers a wide range of options to suit corridors, stair cores, apartments, offices, and specialist facilities:
Internal FD30 doors – ideal for many commercial and residential applications; see our internal fire doors
FD60 fire doors – higher‑rating solutions for escape routes and higher‑risk areas; explore our fd60 fire doors (also described as fire doors 60 minute or fire door 1 hour rating assemblies)
Glazed options – clear and obscure vision panels and larger glazed areas using fire‑rated glass within the certified size limits
External fire doors – solid timber‑core door leaves with robust frames, weather strips, and seals for external locations; see our external fire doors
Door sets and kits – coordinated leaf, frame, seals, and hardware supplied together to simplify specification and ordering
If you need support choosing between different fire door solutions, our team can talk through use‑cases, ratings, and documentation requirements.
What to expect when you order commercial fire doors
Premier Fire Doors is a specialist fire door supplier rather than an installer, with a focus on compliant, traceable product supply but work with third paty installers who carry 3rd party accreditation..
1. Consultation and specification support
Discuss project requirements, drawings, and schedules with our advisory team.
Clarify ratings (FD30 vs FD60), locations, glazing needs, and frame/lining details. Identify whether standard or bespoke sizing is required.
2. Quotation and product selection
Use our fire door configurator or contact sales@premierfiredoors.com for itemised quotations.
Select from standard sizes or confirm made‑to‑measure door and frame dimensions. Choose finishes, vision panel sizes (where permitted), and ironmongery options.
3. Manufacture and quality checks
Standard and bespoke doors are manufactured to the agreed specification.
Frames, leaves, and components are checked for twisting, cupping, bowing, and finish quality.
FD60 products are matched with appropriate hardwood linings where required by certification.
4. Dispatch and delivery
Orders are dispatched via specialist couriers; lead times depend on product type and manufacturing schedules.
Customers are advised to inspect goods carefully on arrival, photograph any damage, and note issues on the carrier paperwork.
Faults or transit damage should be reported within the stated timeframes so that replacements or refunds can be assessed.
5. Installation and compliance documentation
Premier Fire Doors is a supply‑only business; installation is carried out by independent, competent installers.
We provide written guidance and video resources to support correct fire door installation and fire door assembly.
Every order includes a compliance pack to help you demonstrate traceability and support Building Control and fire risk assessment records.
We supply commercial fire doors and associated components to building professionals, organisations, and homeowners across the United Kingdom, with nationwide delivery supported by specialist couriers.
Whether you are managing a care home refurbishment, a multi‑storey apartment scheme, an office fit‑out, or mixed‑use development, our focus is the same: system‑based compliance, complete documentation, and practical support from enquiry through after‑sales.
Ongoing inspection and fire door solutions for dutyholders. Commercial dutyholders must ensure that installed fire doors remain effective over time.
Premier Fire Doors supports this by:
Supplying complete, tested assemblies to reduce onsite compatibility issues. Providing guidance on inspection points such as certification labels, gaps, seals, and hardware
Offering resources on fire door inspections and maintenance responsibilitiesOur wider fire door solutions are designed to help you choose, document, and maintain doors that meet your legal obligations when correctly specified, installed, and looked after.
FAQs – commercial fire doors
What ratings are available for commercial fire doors?
We supply FD30 and FD60 commercial fire door assemblies. FD30 doors are typically used for many internal corridors and rooms, while FD60 doors are used where longer protection is required, such as stair cores or higher‑risk zones. Performance depends on using compatible tested components and correct installation.
Can I order bespoke‑size commercial fire doors in the UK?
Yes. We can supply bespoke and made‑to‑measure FD30 and FD60 door leaves and frames for commercial projects across the UK, produced to your agreed dimensions and configuration.
Please note bespoke items are manufactured‑to‑order and are non‑returnable under our returns policy.
What is included in a commercial fire door specification?
A robust specification will define the rating (FD30/FD60), leaf type (e.g. solid core), frame/lining details, fire door seals, glazing type and size, ironmongery, and installation method. Our team can help you align these elements with the relevant fire door building regs and certification evidence.
Do you offer different fire doors types for internal and external use?
Yes. We supply internal FD30 and FD60 assemblies, including options suitable for commercial corridors, stair enclosures, and apartments, along with robust external fire doors with solid timber cores, weather strips, and appropriate seals. Internal and external products follow different test evidence and detailing, so choosing the correct type is essential.
Are your commercial fire doors certified?
Our fire door products are supplied as traceable assemblies using compatible tested components, with references to schemes such as BWF Certifire and BM TRADA Q‑Mark where applicable. Certification is dependent on using the correct components together and installing them in accordance with the manufacturer and certifier instructions.
Do you install commercial fire doors on site?
No. Premier Fire Doors is a supply‑only business and does not provide a nationwide fitting service. We work with independent installers and provide guidance materials to help ensure competent installation. Customers remain responsible for selecting suitably qualified installers.
How do I verify that my commercial fire doors are compliant once installed?
Check for a label or plug showing the certificate number and rating, confirm the details using the relevant certifier’s online register, and ensure that the door leaf, frame, seals, glazing, and ironmongery all match the certified specification. Regular inspection and maintenance are essential, and alterations after installation may invalidate certification.
Can commercial fire doors include glazed vision panels?
Yes, many certified systems permit glazed vision panels or larger glazed areas using fire‑rated glass, provided the size, shape, and glass type fall within the tested scope. We prioritise fire‑rated clear glass, with Georgian Wired (GWPP) available where supported by the certificate.
Plan your next project with compliant commercial fire doors
For your next project, from small refurbishments to multi‑door schemes, contact Premier Fire Doors for fully documented, specification‑led commercial fire doors that support compliance when installed correctly. Call 0330 122 9550 or email sales@premierfiredoors.com to discuss your requirements and request a tailored quotation.